In our daily life, there are places where we need to us […]
In our daily life, there are places where we need to use ratchet straps, so how should we use ratchet straps correctly?
Ratchet tie-down straps can be measured during twisting or a sample can be taken for measurement. On two sections with a distance of at least 1m, take 4 measuring points in different directions, measure a value at each point, and take the average value. The diameter measurement of triangular strand slings (see shaped strand slings) is the height dimension of their cross-section. Check the wire rope sling for looseness. The check of the tightness of the wire rope sling is to be carried out by untying the bundled wires at the end of the wire rope sling.
In addition, there are still many places to pay attention to when using the ratchet lacing. There are also some tips when using it. The same is true for ratchet watch strap manufacturers, but the most important thing is to use it. Pay attention to your own safety during the process.
We have long understood the importance of cargo bundling. Today, more and more tools are available for cargo bundling. Wherein, a ratchet binding strap is used for binding. Compared with sometimes the length of the strap is not enough, the strap needs to be lengthened, so when do you need to lengthen it?
When using straps to bind objects, the length of the webbing at the fixed end is too short to be used, and the strap manufacturer is required to produce an extended version of the tightening device with short straps. However, attention should be paid during the production process. The lengthening of the short belt needs to be changed according to the actual binding requirements, and not lengthened it at will.
The lengthening of the short suspenders means that both suspenders ends need to be sewn, and suspending one suspender end requires sufficient stitch length and stitching, which are based on actual binding forces.